Brakes/Levers/Pads

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

• DIN standard design with anti-corrosion hardware • All weather compound • Centered post

• All weather compound • Cantilever post style • Offset Post • Black • 70mm

Install a pair of Shimano's Acera Hydraulic Disc Brakes and step up to dependable, all-weather braking power. These brakes feature an easy to install post mount design. They use mineral oil for consistent, maintenance-free braking.

- High performance compounds recommended for all-conditions - Steel backing

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

CX Expert mechanical discs offer reliable braking and easy setup compatible with short pull road brake levers. - Bottom load, semi-metallic pads offer durability in muddy and wet conditions - Forged aluminum construction - Single piston - Includes 140mm or 160mm L-series rotor

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

Looking for a great brake upgrade for your SRAM or Campagnolo-equipped cyclocross bike? TRP's CX-8.4 linear-pulls are the answer. The 84mm-tall CNC'd-aluminum arms work seamlessly with SRAM and Campy levers, and they deliver outstanding stopping power and speed control while providing ample mud clearance. Plus, the integrated barrel adjuster on the noodle makes those on-the-fly adjustments simple. Feathery titanium hardware keeps weight down, and you'll love the brake-pad holders that make toeing-in and replacing the pads a breeze.

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Magura - MT 2,4,6,8 Campagnolo - Road Disc

• Mountain-bike shifters built into linear pull-compatible brake levers • Aluminum • Left: triple chainring; Right: 7-speed • Cables and housing included

• Mountain-bike shifters built into linear pull-compatible brake levers • Aluminum • Left: triple chainring; Right: 8-speed • Cables and housing included

•Designed for caliper & cantilever brakes •Forged aluminum construction •25.4/26.0mm clamp •270g pair

• Side pull design • Includes lever, caliper, cable and housing • Aluminum construction • 330 grams/set

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Standard replacement cantilever/v-brake bosses

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Constructed from steel and nylon •4 finger •217g pair

• Side pull brake • Includes levers, calipers, cables and housing • Aluminum