Headsets

- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race - Impact: 45x45 degree Campagnolo Integrated - S.H.I.S.: IS42/28.6|IS42/30 - Stack: 8mm/1mm - Color: Black, Orange, Red - Weight: 68g

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence. -Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between -Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference -7075 T6 Aluminum construction -Sealed, stainless-steel Hellbender bearings

Origin8's Twistr Semi-Integrated & External Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut

This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Origin8's Twistr Semi-Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, and the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut

Origin-8's SSR Threadless Headset is for 1 1/8-inch threadless forks. It features CNC machined 7075-aluminum cups and stainless-steel cartridge bearings for excellent performance and long life. It also comes in many colors to customize your ride. - 93g including star nut and laser top cap - Stack Height: 28.5mm **Anodized colors will vary from batch to batch and may not match exactly - S.H.I.S.: EC34/28.6|EC34/30

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: EC34/28.6/H16/x • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 34mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 55.26g

This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1 1/8-inch fork/headset - Stack height: 8mm - 53 grams

Hellbender 70 Lite headset.

Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 72-degree headset fits 2021 Slash 29 - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

- Forged steel cups with caged 5/32" ball bearings - TH-857 features a alloy top cover - TH Series: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 14.9mm/11mm - Color: Black - Weight: 126g

The Revolver headset features a high precision CNC 6061 Aluminum bearing cover with triple rubber seals for a perfect fit. - Campy spec 45x45 sealed bearings - 15mm dust cover stack height - 2.7oz (76.54g) - Materials: Aluminum Cover, Chromoly Crown Race

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).

The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups. - Stainless steel Angular Contact Bearings - Stainless steel crown race - 1.5'' patented alignment tip for increased durability and performance - Deep Cup model has 22mm insertion of upper and lower cups

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Converts quill style forks to use threadless stems.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: N/A • Weight: 72g

- No. series headsets offer excellent performance and value - No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications - No. 10 S.H.I.S.: ZS44/28.6|ZS44/30 - No. 8B S.H.I.S.: IS42/28.6|IS42/30 - Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B) - Color: Black - Weight: 93g (No. 10), 74g (No. 8B)

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warrranty

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

The FSA Orbit XL-II threadless headset features replaceable sealed cartridge bearings and an AL-7075 crown race. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - Laser etched aluminum top cap

Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

Wolf Tooth Performance Headsets feature Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Custom Cane Creek lower race for Salsa.

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover - Mallet: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm - Color: Black - Weight: 150g

FSA Standard Headset Bearings

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Interlok spacer compatible - 110 year warranty

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 1 Degree Adjustment - Long version is designed for headtube lengths between 115 - 140 mm

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headsets are built with Enduro black oxide bearings and have a one-year warranty. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Upper assembly features: - Ultralight Stem Cap With Integrated Spacer plus an aluminum bolt and a star nut. - 7mm top cover = 8mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - Bearing top cap outer diameter 45.8 mm

Wolf Tooth Precision Headsets for Trek Knock Block are machined in the USA out of aircraft grade aluminum with superior sealing for protection against the elements. Available in a variety of colors to add some style to your bike. These upper headsets are for Trek frames with molded-in internal bearing cups. - Designed to work with Trek's Knock Block system - The top cap on these headsets have unique raised features that key to Knock Block compatible stems (made by Bontrager - If spacers are needed, you will need to use special Knock Block compatible spacers with notch features - This product is the upper headset only - Lower headsets on bikes with Knock Block do not have any unique features. They are usually IS headsets which are available separately

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Headset bearings for Wolf Tooth headsets. - Replacement bearings

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! This model fits bikes with a non-tapered 1-inch headtube and threadless steerer tube.

Compatible crown races for Ritchey headsets. - This adaptor allows 36° headset bearings, such as those from Chris King, to fit the Ritchey WCS Carbon Adventure fork that feature a 45° crown race - This adaptor is designed for the Ritchey Carbon Adventure fork, but it will work with all Ritchey carbon fiber forks, though with possible slight cosmetic inconsistencies - Stainless steel - Use of this adapter will effectively increase fork length by 4.4mm

- Fork crown race for genuine Ritchey headsets - Alloy with 45-degree taper

The 1-1/8" Ritchey Comp Cartridge Logic Threadless Headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Stack Height: 30.2mm - Material: Steel - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Semi cartridge

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

- Forged, CNC machined aluminum cups and race - Micro angular contact sealed bearings - Duron X: External Cup, traditional - S.H.I.S: EC30/25.4-24tpi|EC30/26 - Stack: 27.5mm/13mm - Color: silver - Weight: 94g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

• Steel • Retainer ball bearings, includes top cap and star nut • 1 inch • S.H.I.S.: EC30/25.4, EC30/26

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/UD|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: UD Carbon • Weight: 72g

- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - 50mm height reinforces carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Stainless steel bolt

Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag

• Sealed cartridge bearings • CNC machined 6061-T6 aluminum cups with laser etched logos • 26.4mm & 27.0mm races included • S.H.I.S.: EC30/25.4-24tpi|EC30/26 • Steerer Diameter: 25.4mm • Cup Diameter: 30.2mm • Race Diameter: 26.4mm • Stack Height: 42.5mm • Size: 1-inch • Black or Silver • Weight: 110g including lock nut